User`s guide

Setup Software
Sting II User Guide 19
• Time Lapse: Select this option to record a single frame
according to specific intervals. The Time Lapse Interval is set
on the Recording Mode tab as well (see
Time Lapse Interval).
below).
• Audio/Video: Select this mode to record standard
audio/visual clips.
• Video: Select this mode to record video only (no sound is
recorded).
• MP3 Audio: Select this mode to audio video only (no visual
images are recorded). If you do not have a camera connected
to the device and you do not select this option, the STING II
will not record anything.
• Low Frame Rate: Select this option to record 10 frames per
second (typical is 25-30 frames per second).
• Night A/V: Select this option to optimize the record settings
for recording at night.
Recording Quality
The Recording Quality option sets the quality level of the images or video
clips being recorded. The current value is displayed in red on the button.
The default value is Medium. The higher the quality, the more disk space
will be used to store the file.
To set or change the recording quality:
1. Using the Remote Control, press the MENU key once to access the
Setup software.
2. Press DOWN to highlight the Setup option and press ENTER to
access the Setup window.
3. Use the DOWN key again to navigate to the Recording Quality option
and then press Enter. If you wish to change the recording quality,