User`s guide

Setup Software
Sting II User Guide 18
Record Tab
The Record tab of the Setup software enables you to select the recording
mode, for example whether you will be recording audio and video, only
video, etc. It also enables you to determine if a time date stamp will be
used, and if so, its format, positioning and color. The current value is
displayed in red next to each option. The Record tab contains the following
options:
• Recording Mode
• Recording Quality
• Time Lapse Interval
• Time Date
• Time Date Position
• Time Date Colour
Recording Mode
The Recording Mode option enables you to set the STING II recording
operations. Each time you activate the STING II, it will operate according to
this setting until it is again modified in the Setup software. The default
value is AUDIO/VIDEO.
To set or change the recording mode:
1. Using the Infrared Remote Control, press the MENU key once to
access the Setup software.
2. Press DOWN to highlight the Setup option and press ENTER to
access the Setup window.
3. Use the DOWN key again to navigate to the Recording Mode option
and press ENTER. If you wish to change the recording mode, press
DOWN to select an option, then press ENTER.
Select one of the following: