User`s guide

Getting Started
Sting II User Guide 9
Connecting the STING II via USB
You can connect the STING II via USB to your computer. This will enable
you to access the files directly via your Windows Explorer or by using the
STING II Media Center.
To connect the STING II using a USB Cable:
1. Verify that the STING II is Off.
2. Connect the USB cable to the computer and to the STING II.
3. Press the center navigation joystick and hold it down while turning
the STING II On.
4. Wait a few seconds while the LED on the STING II flashes.
5. Release the center key. You should see that your computer now
recognizes the USB connection and you can access the files on the
STING II.
To disconnect the STING II, it is important to first turn the STING II Off,
and then disconnect the USB cables from the computer and the STING II.
Deleting One or More Files Via the Setup Menu
You can delete one or more files via the Setup menu. However, before
deleting them, you should confirm that you have saved the files to a
backup location.
To delete one or more files:
1. While the Sting is connected to a television or monitor, press the
center button and release it. This will open the Setup Menu.
2. Click the Event Library option to see a list of files.
3. Select one file and click the center button again and release
immediately. This will open an options menu enabling you to choose
from: Play, Delete, or Delete All.
• To delete one file, click Delete.
• To select all files, click Delete All.
4. You are asked to verify your selection. Click OK to delete one or all of
the files, or Cancel to close the window without deleting any files.
Reformatting the Compact Flash or Microdrive
You can easily format the compact flash or Microdrive currently stored on
the STING II.
Note: This will permanently delete all the files currently
saved on the compact flash or Microdrive disk.