Specifications

SECTION 6 Troubleshooting
ESP 400C and 600C Plasma Power Sources
6-1
VOLTS
AMPS
OUTPUT
ACTUAL AMPS
PRESET AMPS
LOW
HIGH
PILOT
ARC
50
MIN
100
200
300
400
500
600
MAX
0
MAIN
POWER
CURRENT
PANEL
REMOTE
OVER
TEMP
CONTACTOR
ON
FAULT
POWER
RESET
FAULT
600C
WARNING
!
6.1 General
Electric Shock Can Kill!
Do not permit untrained persons to inspect
or repair this equipment.
Electrical work must be performed by an
experienced electrician.
CAUTION
!
Stop Work Immediately If Power
Source Does Not Work Properly.
Have only trained personnel investigate
the cause.
Use only recommended replacement parts.
6.2 Fault Indicators
Fault indicators are found on the front panel
Used with the LEDs on PCB1 (located behind
the cover with the ESP label) problems can be
diagnosed.
NOTE: Momentary lighting (flashing) is normal
and does not indicated a fault.
Fault Indicator used with:
LED 3
LED 4
LED 5
LED 7
LED 8
Power Reset Fault Indicator used with:
LED 6
LED 9
LED 10
LED 11
LED 12
LED 13
Front Panel Fault Indicators
PCB1 Located
behind this panel.