Specifications

SECTION 5 Maintenance

ESP-600C Plasma Power Source -

ESP-600C Plasma Power Source -ESP-600C Plasma Power Source -

ESP-600C Plasma Power Source -

5-1

WARNING

CAUTION

5.1 General

Electric Shock Can Kill!

Shut off power at the line (wall) disconnect

before attempting any maintenance.

Eye Hazard When Using

Compressed Air To Clean.

• Wear approved eye protection with side

shields when cleaning the power

source.

• Use only low pressure air.

Maintenance On This Equipment

Should Only Be Performed By

Trained Personnel.

5.2 Cleaning

Regularly scheduled cleaning of the power source is

required to help keep the unit running trouble free.

The frequency of cleaning depends on environment

and use.

1. Turn power off at wall disconnect.

2. Remove side panels.

3. Use low pressure compressed dry air, remove

dust from all air passages and components.

Pay particular attention to heat sinks in the front

of the unit. Dust insulates, reducing heat

dissipation. Be sure to wear eye protection.

Be sure to wear eye protection.Be sure to wear eye protection.

Be sure to wear eye protection.