Specifications

SECTION 1 SAFETY
ESP-600Clasma Power Source -
ESP-600Clasma Power Source -ESP-600Clasma Power Source -
ESP-600Clasma Power Source -
1-7
WARNING
!
Explosion hazard.
• Certain molten aluminum-lithium (Al-
Certain molten aluminum-lithium (Al-Certain molten aluminum-lithium (Al-
Certain molten aluminum-lithium (Al-Li) alloys can
Li) alloys canLi) alloys can
Li) alloys can
cause explosions when plasma cut OVER water.
cause explosions when plasma cut OVER water.cause explosions when plasma cut OVER water.
cause explosions when plasma cut OVER water.
§ These alloys should only be dry cut on a dry
These alloys should only be dry cut on a dryThese alloys should only be dry cut on a dry
These alloys should only be dry cut on a dry
table.
table.table.
table.
§ DO NOT dry cut over water.
DO NOT dry cut over water.DO NOT dry cut over water.
DO NOT dry cut over water.
§ Contact your aluminum supplier for
Contact your aluminum supplier forContact your aluminum supplier for
Contact your aluminum supplier for
additional safety information regarding
additional safety information regardingadditional safety information regarding
additional safety information regarding
hazards associated with these alloys
hazards associated with these alloyshazards associated with these alloys
hazards associated with these alloys
.
•
Do not cut in atmospheres containing explosive
Do not cut in atmospheres containing explosiveDo not cut in atmospheres containing explosive
Do not cut in atmospheres containing explosive
dust or vapors.
dust or vapors.dust or vapors.
dust or vapors.
• Do not carry any combustibles on your person
Do not carry any combustibles on your personDo not carry any combustibles on your person
Do not carry any combustibles on your person
(e.g. butane lighter)
(e.g. butane lighter)(e.g. butane lighter)
(e.g. butane lighter)
• Do not cut containers that have held combustibles.
Do not cut containers that have held combustibles.Do not cut containers that have held combustibles.
Do not cut containers that have held combustibles.