Specifications

OPTIONS
Heavy-duty shelf
Used to hold heavy specimens exceeding the
load capacity of the standard shelf.
Load capacity (per shelf):
• 30 kg
• 50 kg*
• 80 kg*
• 100 kg (5-shelf set)*
*
To install heavy-duty shelves from 50 kg,
reinforcement of the chamber structure is
necessary.
For Type 4
Shelf/shelf bracket
Type 1: W350 x D467 mm
Type 2: W550 x D467 mm
Type 3: W750 x D567 mm
Type 4: W750 x D967 mm
PSL/PG-2: W550 x D567 mm
Load capacity for the standard shelf
Type 1 to 3: 10 kg
Type 4: 30 kg
<Shelf bracket>
•
18-8Cr-Ni Stainless steel 1 set (2 pieces)
• Resin-coated
* Upper limit temperature: +100°C
* PU and PG only
< Shelf >
• 18-8Cr-Ni Stainless steel
Specimen basket
Floor reinforcement
To enhance the floor load capacity inside
the chamber.
• 100 kg
• 200 kg
• 300 kg
Standard specification: 70 kg
For small specimens that cannot be placed
directly on the shelf.
Material: Stainless steel (4 mesh)
• Large
Dimensions: W750 x H35 x D450 mm
Load capacity: 5 kg (equally distributed load)
Baskets per shelf: Type 3: 1
Type 4: 2
• Small
Dimensions: W350 x H35 x D270 mm
Load capacity: 3 kg (equally distributed load)
Baskets per shelf: Type 1: 1
Type 2: 2
Type 3: 4
Type 4: 6
* Place the specimen baskets on the shelf.
* Do not use when exceeding the shelf
load capacity.
* Tests may not satisfy standard
performance if the air flow is blocked, so
ensure sufficient space around the
specimen baskets.
Precision inner chamber
Placing an aluminum box inside the chamber
al low to reduce the air velocity and maintain
the required temperature and humidity
distribution.
Velocity: 0.5 m/sec. or lower
Temperature & humidity fluctuation:
±0.5°C/±2.5% rh
Temperature & humidity distribution:
±0.75°C/±5.0% rh
Effective cross section:
Type 1 W335 x H285 mm
Type 2 W335 x H435 mm
Type 3 W435 x H585 mm
Type 4 W835 x H685 mm
* Standard performance may not be met
under certain conditions. Inquire for
details.
32