User manual

7
Controls
Right click the mouse anywhere on screen to activate the control menu selections.
Selecting main menu will automatically show the SYSTEM LOGIN screen. The default
settings are
User Name: Admin
Password: leave blank
Once logged in you may now right click again to access your menu selections. An
opportunity to change the password is provided within the settings menu. Please note
if an incorrect password is entered three times the DVR alarm will activate. If a wrong
password is entered five times the system will lock out. To reset the system turn the
main power off and back on after 5 minutes.
SHORTCUT MENU
Selecting main menu will take you through to the shortcut menu where most regularly
used settings can be found. Explanations of functions are displayed by hovering the
mouse over each icon.
Record Record set up / record playback / record back up
Alarm Motion detection and alarm event settings
System Time and date / network settings / on-screen display settings
Advanced Hard disk management / password settings / network settings
Info Hard Drive status / system usage log / version details
Making a recording
RECORD CONFIGURATION
This section allows you to configure the recording capability of the DVR to your precise
requirements by each channel / camera.
Channel Select 1–4 (all other settings now effect the specific channel selected)
Redundancy Select if double ( backup ) recording is required when two hard drives are
fitted
Length The record time captured when using motion or alarm trigger detection
Pre-Record The system can automatically archive up to 30 seconds of recording prior
to a motion or alarm trigger
Mode Selects the recording preference either by schedule or to stop and start
recording manually
SCHEDULE RECORDING
Week You now have the ability to specify the recording requirements by each
day ( select all if all days are the same )
Period 1-4 Each day can be segmented into 4 specific recording periods
Regular Simply records constantly within the selected period
Detect Only records by motion detection within the selected period
Alarm Only records by alarm trigger within the selected period
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 7