F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 1 4 CHANNEL NETWORKABLE CCTV SYSTEM W I T H I NTE G R AL 5 0 0 G B H A R D D R I VE USER MANUAL
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 2 SAFETY NOTICE IMPORTANT PRECAUTIONS! HIGH VOLTAGE HAZARD! HIGH VOLTAGE INSIDE! • Please keep this manual for later use. • Please strictly comply with the warning indications on the machine and in this book. • Please abide by instructions when operating. • Do not use accessory devices not recommended by the manufacturer. Incorrect usage of accessory device may cause harm. • Please use the power adapter equipped for the unit.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 3 Contents Front panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Rear panel layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Basic operations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Controls . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 4 Front Panel 1 2 3 5 4 6 4 No.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 5 Rear Panel 10 2 3 4 7 6 11 1 5 13 12 9 8 No.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 6 Basic operations POWER ON Plug the lead from the 5-way power supply marked DVR into the 12VDC power supply input of the DVR. Turn on the DVR at the power switch located on the rear panel. The Power supply indicator light ( Blue) will illuminate on the DVR front panel followed by a short bleep. POWER OFF Turn off the DVR at the power switch located on the rear panel Notes on power 1.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 7 Controls Right click the mouse anywhere on screen to activate the control menu selections. Selecting main menu will automatically show the SYSTEM LOGIN screen. The default settings are User Name: Admin Password: leave blank Once logged in you may now right click again to access your menu selections. An opportunity to change the password is provided within the settings menu.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 8 PLAYING BACK A RECORDING To view recorded data right click anywhere on screen and enter playback directly from the menu. The playback screen can also be found in the main menu shortcuts record > Playback. To play back recorded material left click on search and enter the following data. File Type Do you wish to search for all recorded material or recordings made from specific triggers such as alarm or motion detection events.
F193 Digiview4i Manual:Layout 2 Type 26/7/11 07:44 Page 9 Do you wish to back up all recorded material or recordings made from specific triggers such as alarm or motion detection events. Channel Select the channels that you wish to back up. Start Time Select the start date and time of the desired back up. End Time Select the end date and time of the desired back up. Once you have entered the selections above click Add, data applicable to the selections will now appear in the main screen.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 10 System The system sections allows configuration of much of the general functionality of the DVR. General Setting time and date, Language and machine identification details. Encode Each channel can be configured for recording resolution, frame rate and picture quality. High resolution with high frame rates at high quality will create the highest amount of data (Bit rate) and therefore fill up the hard drive at the quickest rate.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 11 INFO HDD Info Information on Hard drive including HDD type . Space left on drive quoted both a capacity or record time left according to record settings. BPS Live display of Specific KB/S and MB/H rate per channel. LOG Time and dated data log of all major users and system functions. Version Specific description of DVR including serial number and build date. Logout Logout of the DVR , Shutdown the DVR or re-boot the DVR.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 12 LOCAL NETWORK VIEWING - INTERNET EXPLORER After connecting your DVR to the network, your PC ‘Web browser’ (internet explorer) can be used for local or remote viewing. Step 1 Open web browser on a local PC (same premises as DVR), then enter the DVRs IP address and ‘HTTP port’ into the address bar. For example, the IP address of the DVR is 10.10.10.105, and ‘HTTP port’ number is 5557 then you should enter http://10.10.10.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 13 Viewing your cameras Choose and click a viewing window on the left hand side where you wish to display your first camera. Next, pick a camera from the right hand list and double click it. The camera you have chosen will now be displayed in the left hand window. Adding your other cameras is the same method; you just have to choose an unused window from the left hand side for each new camera.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 14 Troubleshooting The DVR cannot boot up normally. Possible reasons are as follows: 1 The power supply is not correctly connected. 2 The rear power switch is in the off position 3 The power supply is damaged 4 The hard disk is damaged . 5 The front panel is damaged. 6 The main board of the DVR is damaged. The DVR reboots automatically or stops working after boot up a few minutes.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 There is audio signal in the surveillance window but no audio signal in playback Possible reasons are as followed: 1 Setting issues: the audio option is not chosen. 2 The according channel is not connected with the video. 3 There is no audio device connected. The time is wrong. Possible reasons are as followed: 1 Setting is wrong. 2 The battery is in bad connection or the voltage is too low.
F193 Digiview4i Manual:Layout 2 26/7/11 07:44 Page 16 Technical Support 01527 515145 Elite Security Products Unit 7, Target Park, Shawbank Rd Lakeside, Redditch B98 8YN Telephone: 01527 515150 Technical Support: 01527 515145 email: info@espuk.
