User guide

How to Backup through USB port to PC
Backup through USB port
The unit provides one USB port to simple
backup over the connection with PC.
Please mind the following steps to
successful link.
Step 1.
Connect the USB cable between the unit
and PC
Step 2.
Select “LINK TO PC” under submenu of
the unit
Step3.
The “linking” will take around 30sec.
Step4.
The connection is ready for PC backup as
“Linked” indicates on the screen.
Step 5.
Open the PC viewer on PC, once PC
identifies one unknown Hardware device
Step 6.
Press”Menu” button back to “Main Menu”
Notice:
1.the unit employs USB 2.O, so it will take
around 5 min to hand shake with USB 1.0.
2. Before operating backup over USB,
please install PC viewer software into
your PC.
3. Using “USB Player” (Software in CD)
to backup via USB.
4. Using Remote Client (Software in CD)
Player to backup and remote control on
Internet.
Warning: Please don’t press “MENU”
button during linking status, it would
likely lead to unpredictable Error on
your PC. Once the PC Link has been
activated the DVR play and record
functions will be inoperable as
control is passed to the connected
PC.
There is a USB device icon show on
your screen when PC detects DVR
HDD.
NOTE:
Before attempting to make PC Link using the
USB ports please make sure that the DVR
is not in Record or Playback mode.