User guide

SENSOR SETUP MENU
SENSOR RECORD TIME:
Recording duration once sensor
Being triggered.
Selects record time from 0 ~180 seconds.
ALARM OUT TIME:
It controls how long ( in second)
the alarm sounds after being triggered.
Selects alarm ON time from 0 ~ 30 or
continuous.
SENSOR SET UP
Use the▼ and ▲ buttons to select
channels 1 ~ 4.
Use the  button to select options
(Normal Open/Close)
Press the  button to exit
In normal open
mode
the cable line Connected between
the sensor and the unit is cut off by
an intruder, the unit starts recording.
In normal close
mode,
the cable line connected between
the sensor and the Unit is cut off by
an intruder , the unit stops recording.
SENSOR SETUP
SENSOR RECORD TIME 15
ALARM ON TIME 20
SENSOR SET UP
MOTION SETUP
PRESS (<,>) THEN (SELECT)
PRESS (MENU) TO EXIT
SENSOR SETUP
CHANNEL-1 NOT INSTALL
CHANNEL-2 TYPE:NORMAL-OPEN
CHANNEL-3 TYPE:NORMAL-CLOSE
CHANNEL-4 TYPE:NORMAL-OPEN
PRESS (<,>) THEN (SELECT)
PRESS (MENU) TO EXIT