Operator’s Manual Original Operating Instructions QuickFlip™ 2 Flip-Style Sled Shelter GAS/OIL RATIO 50:1 Get parts online at www.GetEskimo.com 15594 ECN # 9932 Rev. 1 06/18/2013 © Copyright 2013 Ardisam, Inc. All Rights Reserved.
Operator’s Manual ESKIMO® QuickFlip™2 INTRODUCTION Eskimo® Ice Shelters are engineered with the ice fisherman in mind. We make quality and durability our priority, and we appreciate your purchase of one of our ice shelters. Follow these simple instructions and your ice shelter will provide you many years of troublefree pleasure. Save these instructions for future reference.
Operator’s Manual ESKIMO® QuickFlip™2 IMPORTANT SAFETY PRECAUTIONS This shelter is made with flame resistant fabric which meets CPAI-84 specifications. It is not fire proof. The fabric will burn if left in continuous contact with any flame source. The application of any foreign substance to the shelter fabric may render the flame resistant properties ineffective. Fuel-based heat sources burn oxygen and emit carbon monoxide (an odorless, colorless, poison gas).
Operator’s Manual ESKIMO® QuickFlip™2 ASSEMBLY INSTRUCTIONS ¼-20 x 3/4” bolt Tools needed – (2) 7/16” wrenches, a Phillips head screwdriver, rubber mallet (optional), and a cordless drill (optional). ¼-20 x 1” bolt Assembly Note: This ice shelter should be assembled in a garage or basement setting due to the time and length of assembly. Identify and familiarize yourself with all parts and hardware before assembly. Allow 1-3 hours for assembly.
Operator’s Manual ESKIMO® QuickFlip™2 VERSA SEAT INSTALLATION 6. Attach the (2) seat rails (11200) and (2) support shims (11230) through holes #2 and #4 on the tub support strap (69677) using (4) ¼-20 x 1” bolts, (4) ¼-20 nylock nuts and (8) ¼” washers. Align the slots on the first seat rail (11200) with hole #4 on the tub support strap (69677) and secure it with (1) ¼-20 x 1” bolt, (1) ¼-20 nylock nut and (1) ¼” washers. Repeat with other seat rail on hole #2. SEE FIGURE 3 7.
Operator’s Manual ESKIMO® QuickFlip™2 SHELTER FRAME/SKIN INSTALLATION back spreader pole 13. Assemble the two sets of door spreader poles by sliding male half (69357) into female half (69356) and snapping in place with snap button. When complete, take (1) spreader pole assembly and clip one end to the front upper frame pole and the other end to the lower frame pole. Do the same on the opposite side with the other spreader pole assembly.
Operator’s Manual ESKIMO® QuickFlip™2 20. Secure the edge trim in place using the (15) #6 x 3/8” sheet metal screws provided. A cordless drill and Phillips head bit is recommended for this step, but is not necessary. SEE FIGURE 10 Note: Screws should be spaced evenly apart. This step does mean you will put very small holes in your shelter skin to keep the edge trim and skin securely attached to the sled lip. This will in no way affect the performance of your shelter. ADDITIONAL INSTALLATION 21.
Operator’s Manual ESKIMO® QuickFlip™2 PARTS EXPLOSIONS QuickFlip™ 2 10 9 4 11 8 12 5 13 14 2 1 3 6 7 8 Check for parts online at www.GetEskimo.
Operator’s Manual ESKIMO® QuickFlip™2 QuickFlip™ 2 PARTS LIST REF. NO. DESCRIPTION PART NO. QTY. 1 SLED 68380 1 2 TUB SUPPORT STRAP 69677 2 3 RISER HINGE A 68052 1 4 RISER HINGE B 68053 1 5 ASSEMBLY HINGE B 15551 1 6 ASSEMBLY HINGE A 15552 1 7 BOTTOM CROSS BRACE POLE 15553 1 8 TOP CROSS BRACE POLE 15554 3 9 BACK SPREADER POLE 68422 1 10 SPREADER POLE 29 IN 69679 1 11 SPREADER POLE 34.5 IN 69331 1 12 FEMALE SPREADER POLE 22.
Operator’s Manual ESKIMO® QuickFlip™2 PARTS EXPLOSIONS QuickFlip™ 2 3 1 2 4 QuickFlip™ 2 PARTS LIST REF. NO. 10 DESCRIPTION PART NO. QTY. 1 SEAT RAIL 11200 2 2 VERTICAL FRAME SUPPORT 11305 2 3 SEAT VERSA TOP 15004 2 4 SUPPORT SHIMS 11230 2 Check for parts online at www.GetEskimo.
Operator’s Manual ESKIMO® QuickFlip™2 QUICKFLIP™ 2 Warranty Terms and Conditions PRODUCT WARRANTY: 1-YEAR LIMITED WARRANTY Ardisam, Inc., warrants this Eskimo® QuickFlip™ 2 under a one-year limited warranty to be free from defects in materials or workmanship or both for a period not exceeding twelve consecutive months from the date of original purchase by the first retail consumer or commercial end user. “Consumer use” means personal recreational use by a retail consumer.
Eskimo®, Division of Ardisam, Inc. 1160 8th Avenue, PO Box 666 Cumberland, WI 54829 800-345-6007 | Fax 715-822-2223 Email: info@ardisam.com All weights, specifications and features are approximate and are subject to change without notice. Due to continuous product improvements, product images may not be exact. Items used for props not included. Some assembly may be required. Check for parts online at www.geteskimo.
