TABLE OF CONTENTS 1 2 3 4 5 General description FCC Statements /Déclarations FCC IC Statements /Déclarations IC Installation Electrical characteristics Page Page Page Page Page 2 2 3 3 4 Page 1
1 General description PixMob BLE Repeater is a product used to increase the range of BLE devices by repeating and amplifying the received packets. Upon reception of packets containing the proper header coming from phones or tablets with Bluetooth Low Energy capabilities that can run the Spark application designed by PixMob.
IC Statements/Déclarations IC IC: 7254AREP This device complies with Industry Canada licenceexempt RSS 247 standard. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This Class B digital apparatus complies with Canadian ICES003.
It can be located anywhere within 10 meters of the source device or 15 meters of another repeater; ideally at least 2 meters above ground. Multiple Repeaters can be used in a star configuration to cover a wider area (refer to picture below). To turn on the Repeater, press and hold the button until the red LED blinks fast 3 times. To turn it off, press and hold the button at least 1 second until the red LED is off. When active, if the red LED is blinking fast, it means it is repeating.
