Specifications

39
7. Specifications
1. Input Level +4dBuBalanced: +4dBuNominal,+24du max.
+4dBu Unbalanced: +4dBu Nominal, +18dBu max.
-10dBV Balanced: -10dBV Nominal, +9.5dBV max.
-10dBV Unbalanced: -10dBV Nominal, +3.5dBV max.
2. Output Level +4dBu Balanced: +4dBu Nominal, +22.5dBu max.
+4dBu Unbalanced: +4dBu Nominal, +16.5dBu max.
-10dBV Balanced: -10dBV Nominal, +8.5dBV max.
-10dBV Unbalanced: -10dBV Nominal, +2.5dBV max.
3. Input Impedance: Balanced mode 40KΩ, Unbalanced mode 20KΩ
4. Output Impedance: Balanced mode 200Ω, Unbalanced mode 100Ω
5. Input Gain/Attenuation Analog: 0dB ~ 18dB in 0.5dB step sizes
Digital 72dB ~ 0dB, in approx. 0.5dB step sizes
6. Output Gain/Attenuation Digital: 72dB ~ 0dB, in approx. 0.5dB step sizes
7. Sample Rates: 8KHz, 16KHz, 32KHz, 64KHz, 11.025KHz, 22.05KHz,
44.1KHz, 88.2KHz,12KHz, 24KHz, 48KHz, 96KHz
8. A/D Specifications:
1) Type 24-Bit 96kHz, 64x Over sampling
2) Dynamic Range 100dB A-weighted
3) Signal-to-Noise Ratio 100dB A-weighted
4) S/(N+D) Ratio 90dB
5) Inter channel Gain Mismatch 0.2dB
6) Frequency Response 1Hz ~ 20KHz (FS=44.1KHz) 1Hz~ 40KHz
(FS=96KHz)
9. D/A Specifications:
1) Type: 24Bit 96kHz, 128x Over sampling
2) Dynamic Range: 110dB A-weighted
3) Signal-to-Noise Ratio: 110dB A-weighted
4) S/(N+D) Ratio: 94dB
5) Inter channel Gain Mismatch: 0.2dB
6) Frequency Response: 1Hz ~ 20KHz (FS=44.1KHz) 1Hz ~ 40KHz
(FS=96KHz)
10. Digital I/O
1) Type RCA connector, 1 in/1 out 24-Bit 96kHz Digital Audio I/O with Sample
Rate Converter
2) Format: IEC60958,AES 3, S/PDIF,EIAJ CP1201
3) Sample Rate: 8KHz ~ 96KHz
4) Resolution: 24 Bits
5) Sample Rate Converter: 128dB Dynamic Range
1:3 & 3:1 Maximum input to output sample rate ratio
11. Analog I/O
1) Type: 1/4” TRS Phone jack, 2 in/2 out
2) Format: +4dBu nominal, balanced or –10dBV nominal, unbalanced
12. Additional Header Pin I/O
1) Word clock in/out
2) Sync in/out
3) CD-ROM digital audio in/out (S/PDIF)