Specifications

ESI Waveterminal 192

10. Specifications

1. Waveterminal 192X

1. Input type : Analog Line_In - 2 Channel (1/4" TRS phone Plug)

2. Output Type : Analog Out - 6 Channel(3 Stereo 1/4" TRS phone Plug)

Digital Out - Optical Out (TOS-LINK)

3. Input LEVEL : +4dBu balanced, +4dBu Nominal, +22.5dBu Max

4. Output LEVEL : +4dBu Unbalanced, +4dBu Nominal, +16.5dBu Max

5. Input Impedance : 10K ohm

6. Output Impedance : 100 ohm

7. Output Attenuation : Digital -127dB ~ 0dB, 0.5dB Step Size(with Mute)

8. A/D Spec

1) Sampling Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192 KHz

2) Dynamic Range (S/N) : 123dB A-Weighted (Typical)

3) Frequency Response : 20 ~ 21.768KHz (@ fs=48KHz)

4) Resolution : 24 Bits

9. D/A Spec

2) Sampling Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96, 176.4, 192 KHz

2) Dynamic Range (S/N) : 106dB A-Weighted (Typical)

3) Frequency Response : 20 ~ 21.768KHz (@ fs=48KHz)

4) Resolution : 24 Bits

10. Digital Out Spec

1) Type : Optical connector (TOS-LINK)

2) Format : IEC-958 Consumer(S/PDIF), IEC-958

Professional(AES/EBU)

3) Sample Rate : 16, 22, 24, 32, 44.1, 48, 88.2, 96 kHz

4) Resolution : 24 Bits

11. Headphone Amp Spec

1) Output Power : 60mW Max

2) Signal to Noise Ratio: 110dB (Typical)

3) (THD+N)/S : -70dB, 0.03% (Typical)