Specifications

ESI VLS-2000 Video Line Scaler Operating ManualVersion 1.2
ESI VLS-2000 Video Line Scaler Operating Manual Page 14
3.2.12 Save
This allows saving a group of control settings for Brightness, Contrast, Color, Tint,
Detail, Noise, Motion, Black, and Source. As an example, Input 1 might be connected
to cable TV. For movies, the settings might be slightly different than those used for
sports events. In that case the settings for movies would be stored in Preset1, and the
settings for sports events stored in Preset2. These could be simply recalled with the
Load function when that source is again viewed. There are three separate presets for
each of the three inputs (No settings are necessary for the HDTV pass-thru). To save a
preset, use the UP and DOWN buttons to choose Preset1, Preset2, or Preset3.
Pressing SELECT again will cause the preset to be saved to memory. “*Storing
Preset*” will appear on the display to acknowledge the action. To reset the factory
values, go to Load and select the factory settings, then Save these values into the
desired Preset. Control values saved will be retained even if power is lost to the unit.
Your most used settings should be saved to Preset1, since this is what is loaded when
the unit is first powered up.