Specifications

ESI
23
Velocity Curve
Neonhas4internalvelocitycurves.Defaultatpower‐upisalways1.Tochange:
1. PressSHIFT+Vel.Curve.
2. Typein1‐4.PressENTER
Velocitycurvenumbersgreaterthan4areinvalidandwillbeignoredifentered.
Velocity Offset
Aprogrammableoffsetcanbeaddedtothevelocitygenera tedbythekeyboard.Thisvaluecanbeinthe
range‐64to+64.Defaultatpower‐upisnooffset.Tochange:
1. PressSHIFT+Vel.Offset.
2. Forpositivevalues,firstpresstheINC/+buttontoindicatea
positivevalue.TheLEDnexttothe
button will light up. Next, type in the value 0‐64. For negative values, first press the DEC/‐
buttontoindicateanegativevalue(LEDwilllightup),thentypeinthenumber0‐64.
3. PressENTERtocompletetheoperation.
Sustain Pedal
TheSustainPedalinputcanbeprogrammedtoacceptnormally‐openornormally‐closedtypesofsustain
pedals.Toswitchthemode,PressSHIFT+Sus.Pedal.IfyouhearthenotesfromNeON“hanging”,you
maytrytoswitchthistotogglethesustainmode.
Octave +/-
TheNeONkeyboardcanbetransposedupordownbypressingtheOCT+orOCT‐buttons,respectively.