Specifications

MaXiO System Manual
37
ETC Setting
ADAT S/MUX Mode: - Normal (44 kHz ,48 kHz – 8 channels)
- SMUX 1 (96 kHz – 4 channels)
- SMUX 2 (192 kHz – 2 channels)
LED Display: - Mode 1 (shows a continuous graphical representation of the level)
- Mode 2 (continuous display with level meter peak hold)
- Mode 3 (shows a dot representation of the level)
- Mode 4 (the level meter will hold the maximum level that was reached)
Routing Table:
This is where you can route input ports and output ports of EX8000. The 4 pair of stereo channels
look alike and function identically. EX8000 has 4 different types of I/O ports – E.D.I, Digital
(AES/EBU and S/PDIF), Analog and ADAT. You can select an input port for each output port.
Example: If you want to send the signal that comes from analog input to E.D.I output (to the
MaXiO PCI host card), you would set the control panel like shown on the following picture.
Please have a look at the following audio routing table that shows you all the audio routing options
of EX8000 when connected to the MaXiO PCI host card.
E.D.I OUT
E.D.I
DIGITAL
ANALOG
ADAT
E.D.I
DIGITAL
ANALOG
ADAT
E.D.I
DIGITAL
ANALOG
ADAT
E.D.I
DIGITAL
ANALOG
ADAT
8CH 24-bit/192kHz
DIGITAL OUT
{ Professional
~ Consumer
ANALOG OUT
8 XLR balanced OUT
8 TRS balanced OUT
ADAT OPTICAL OUT
~ Normal : 8CH 24-bit/48kHz
{ S/MUX 2 : 4CH 24-bit/96kHz
{ S/MUX 4 : 2CH 24-bit/192kHz
E.D.I IN
8CH 24-bit/192kHz
DIGITAL IN
ANALOG IN
ADAT OPTICAL IN
4 XLR Out
4 RCA Out
4 XLR In
4 RCA In
8 XLR / TRS IN

MIC / LINE, GAIN
A
DC
~ Normal : 8CH 24-bit/48kHz
{ S/MUX 2 : 4CH 24-bit/96kHz
{ S/MUX 4 : 2CH 24-bit/192kHz

DAC
~ Professional
{ Consumer
E.D.I
E.D.I
E.D.I