Specifications

MaXiO System Manual
34
5.4.3 I/O Config
Analog: This where you adjust the analog output level of the analog output channel of the MaXiO
PCI host card. This analog output is only available when you have connected a device to the M.D.I
port with analog outputs (such as the MaXiO 032 breakout box).
S/PDIF: this can be Pro, which means that actually an AES/EBU signal with the ‘professional’
status bit set is transferred via the S/PDIF I/O of the MaXiO PCI host card (via the M.D.I
connection, e.g. the M.D.I breakout cable), or it can be Consumer, which means that normal S/PDIF
signals are transferred.
Word: this setting allows you to define if you want to send out a standard Word Clock (FS) or a
Super Clock (256FS) signal via the Word Clock output of the M.D.I connection, e.g. the M.D.I
breakout cable.