User`s guide

Administrator programming: An introduction IVX X-Class Administrator’s Manual
A.6
Selectable numbering plan
The selectable numbering plan offers up to three pre-configured numbering plan ranges that begin with
100, 200, and 300. When an extension numbering range is selected, department numbers and guest
mailbox numbers are also changed. However, regardless of which extension numbering range is se-
lected, feature codes, CO line groups, cascade mailboxes, group mailboxes, and Q & A mailboxes will
stay the same. The numbering plan range is selected in Installer programming.
Selectable numbering ranges
Notes: For each table, ranges different from the default dialing plan appear in bold.
The ESI Presence Management RFID Reader
1
uses one digital extension, regardless of the numbering
plan chosen.
Selection 100–267 (default) Selection 200–367 Selection 300–467
From To Used for From To Used for From To Used for
0 0 Operator 0 0 Operator 0 0 Operator
100 267 User extensions 200 367 User extensions 300 467 User extensions
280 299 Department numbers 380 399 Department numbers 470 489 Department numbers
300 489 Guest/info mailboxes 100 199 Guest/info mailboxes 100 289 Guest/info mailboxes
400 489 Guest/info mailboxes
Common to all selections
From To Used for
490 499 Q & A mailboxes
— 500 Broadcast mailbox
501 516 Group mailboxes
520 529 Cascade paging mailboxes
550 589 Feature codes
— 599 Overhead paging port
600 699 System speed-dial
700 799 Esi-Link
2
locations or CO line groups (71–76)
8 9 CO line group access
1
For more information, see the ESI Presence Management Installation Manual (ESI # 0450-0792).
2
Esi-Link will be supported (i.e., in numbering ranges 200–367 and 300–467) in a future revision of this feature.