User`s guide

Special keys User’s Guide
F.6
Line keys
If some of your programmable feature keys have been programmed as line keys (or you can program
line keys using PROG/HELP 2), press an unlit key to access the line. An outside call transferred to your
station can be answered by simply lifting the handset or pressing SPEAKER. You do not have to press
the line key. The LED indications for the line keys are:
LED Line status
Solid red In use
Solid green Connected to your station
Blinking red Ringing at another station
Blinking green Ringing at your station
Slowly blinking red On hold by another station
Slowly blinking green Held by you
Note: Dialing 9 (or 8 or 7) to be assigned a line automatically is always available.
Privacy release
This feature makes it easy to “conference-in” on a call: just press a line key assigned to the outside line
the call is using, and you’ll automatically join the call.
1
Private line
If a private line has been assigned to your station, you must have a line key programmed (see pages
C.2–C.3) in order to access it.
1
This feature may not be available on your system, depending on how it has been programmed. If you wish to enable this feature
on your phone system, contact your System Administrator.