Installation manual

Function 5: Voice mail programming IVX C-Class with voice mail: Installation Manual
H.4
Function 56: Cascade paging mailboxes
In addition to individual mailbox paging, the IVX C-Class system can support up to 10 cascade paging
mailboxes (520–529). These can be assigned to anyone who requires escalating levels of paging
beyond the single level available in all user mailboxes. In this function, you program the paging numbers
and number of times each is to be paged before the next paging number is added; additionally, the
mailbox owner can program these settings. To record a greeting, press PROG/HELP

and the
mailbox number; then press # to confirm, and follow the prompts. The default password is the mailbox
number.
Cascade mailbox options
The user can program up to three paging numbers, of up to 24 digits each, to be paged whenever the
mailbox takes a new or urgent message. The system will page the first paging number (for the number of
times listed), then add the second paging number (for the number of times listed), then add the third
paging number and will continue to page all three pagers until the message has been retrieved.
1.
MB
2.
1st number
3.
Attempts
4.
2nd number
5.
Attempts
6.
3rd number
520 9725553232 2 9725554254 3 9725555452
To program this, enter:
1. The mailbox number — Range: 520–529. [Then press 1 to enter number programming, and
proceed to Step 2.]
2. First pager number — The number to be dialed (without the CO line Group [9, 8 or 7).
3. Attempts — How many times the system will page (up to 20) before adding the second
pager number. Range: 0–99. (0 turns off delivery.)
4. Second pager number — The number to be dialed (without the CO line Group [9, 8 or 7]).
5. Attempts — How many times the system will page (up to 20) before adding the third
pager number. Range: 0–99. (0 turns off delivery.)
3. Third pager number — The number to be dialed (without the CO line Group [9, 8 or 7]).
Code What it produces
# # DTMF tone


DTMF tone
F Flash hook
P 2-second pause
To insert a special code, press the right scroll key (

) to select the desired special code: # ,

, F
or P. Press # to confirm the inserted character and continue. Press # # to complete. Use the left
scroll key (

) to backspace. Once the number is saved you can use the scroll keys to move back
and forth to view the number. To edit the number, you must delete it and enter the correct number.