Installation manual

Function 4: Auto attendant programming IVX C-Class with voice mail: Installation Manual
G.4
Function 43: Automatic day/night mode table
You program the day/night mode table by selecting the day of the week, then entering the start time,
and then selecting the mode — day or night. At the time you’ve programmed, the appropriate greeting
for that mode will play and the system will follow the appropriate day or night forwarding. Enter the times
in military time (0000–2359). Each day can have up to six different times.
1. Select the day of the week by pressing a scroll key (either

or

).
2. Press # to confirm.
3. Enter the day’s start time in 24-hour format.
4. Press # to confirm.
5. Select the mode — DAY, NGT — by pressing a scroll key (either

or

).
6. Press # to confirm.
7. Repeat steps 3–6 for the day’s next setting or press # again to program another day.
8. When finished, press # again to exit.
Note: To delete an entry, press HOLD.
Day/night mode worksheet example
In the example below, night mode is programmed for:
o After 5:00 PM on Monday, Tuesday, Thursday and Friday.
o During lunchtime on Monday, Tuesday, Thursday and Friday.
o After 2:00 PM on Wednesday and Saturday.
o All day Sunday.
Mon. Tue. Wed. Thu. Fri. Sat. Sun.
0800 D 0800 D 0800 D 0800 D 0800 D 0800 D
1200N 1200N 1400N 1200N 1200N 1400N
1300D 1300D 1300D 1300D
1700 N 1700 N 1700 N 1700 N
Note: For the schedule to take effect, the system must be placed in the “auto” mode.