Installation manual

Function 3: Extension programming IVX C-Class with voice mail: Installation Manual
F.6
Example: Here is a portion of a completed Programming Worksheet for Department
programming. Department 290 was created to have calls directed to it to first ring
104, then, if busy/no answer, 110, and then 112. If all are busy or do not answer,
the call will forward to the operator if in day mode — or, if in night mode, to guest
mailbox 300 for retrieval in the morning. Department 291 rotates calls between
the two extensions listed; if both are busy/no answer, calls go to the service
manager (X105) — or, if in night mode, to Guest Mailbox 301, which has been set
to page the tech on-call.
1.
Ext.
2.
Name
3.
Type
4.
CF day
5.
CF night
6.
List:
290 SALES IN ORDER X0 MB300 104, 111,
112
291 SERVICE UCD X105 MB301 101, 102
Function 35: Extension button mapping
By default, the programmable feature keys’ initial state is “not programmed” (except in the case of
station 100, on which the upper left key is a day/night key). Use this function to change the
programmable feature keys system-wide. Users can later change the programmable feature key
positions for their stations as part of station programming.
Important: Future, system-wide changes made later here by the Installer will overwrite any station user
programming.
When prompted, press the desired programmable feature key location, then enter the appropriate digits
on the dial pad and confirm by again pressing the same programmable feature key.
To determine how a programmable feature key is currently programmed, press the key, note how it is
programmed, and press the key again.
The keys can be programmed as follows:
CO line key
If the dialed digits are 1–6, the key will serve as a CO line key.
Note: Removing the line key appearances will set the station(s) to operate as a PBX with line access by
dialing 9 (or 8 or 7).
Station key
If the digits entered constitute a three-digit extension number (or department, guest mailbox, etc.), the
key will become a station key providing the appropriate lamp information (See “System fixed numbering
plan,” page C.2).
Speed-dial key
If one enters 9 (or 8 or 7) plus a phone number, the key will become a speed-dial key for
outside calls. Alternatively, the user may enter the system speed-dial bin (600–699).
(Continued)