Installation manual

IVX C-Class with voice mail: Installation Manual System programming: An introduction
C.1
System programming: An introduction
You can program an IVX C-Class system from a 24-Key Digital Feature Phone in the system (while the
system is operating).
Read the C-Class User’s Guide first. Programming features require a clear understanding of user
interface and application.
Once you’ve accessed programming mode on a 24-Key Digital Feature Phone, the system will prompt
for — and confirm — each keystroke action via voice commands and the display. You program both
configuration data and recordings in the same manner.
Programming keys
During programming, the first line of the display will show the current item being programmed, and the
second line will be the entry line. You can enter values as directed by the combination of the voice
prompts and display. To enter multiple values, such as a list of extension numbers, separate each value
by # (to exit the list, enter # #).
To... Press ... What this does
Enter
#
Confirms new or existing entry and advances to next
programming step.
Back up (i.e.,
reverse direction)

Backs up to previous prompt without changing its value.
Delete
HOLD
Deletes data or recording.
Exit [Hang up] Exits programming mode and removes extension from DND.
Help
HELP
Provides more detailed instructions during programming.

(left-side
scroll key)
• During entry of a value, backs up.
• If a list is present (“>” is displayed), scrolls to left.
Select/scroll

(right-side
scroll key)
• Selects from options presented.
• If a list is present (“>” is displayed), scrolls to right.
• Inserts a space during entry of a name.
Note: Either < or > in the display indicates that additional choices or values are available by pressing a
corresponding scroll key (

or

).