User`s guide

User’s Guide Special keys
E.3
1. To enter each character for the name, press the dial pad key that includes the desired character.
The key’s possible character entries will change each time you press the key.
2. When the desired character appears, press # to confirm its entry. The cursor will move to the next
character position. Use  and  (the scroll keys) to back up or to insert a space.
Example: To enter a B, press 2 twice (the possible options through which to scroll are A, B, C and 2).
When B appears, press # to confirm and move to the next entry.
3. Repeat steps 1–2 until the name is complete. The name may contain up to 15 characters (a space
is a character, too).
4. Press # again when finished entering the name.
5. Now, enter the number — including the line access code 9 (or 8 or 7).
Note: Use the  scroll key to enter special characters; use the  scroll key to backspace. You also can
use the scroll keys to view the number after it’s saved. To change the number, you must delete it
and then re-enter it as desired.
6. Press # to confirm the entry.
Deleting names from your Personal Dex
1. While your station is idle (or just after receiving dial tone), repeatedly press ESI-DEX to select the
Personal Dex:
2. Choose the desired name from the selected Dex, using one of the two following methods:
Press repeatedly ... To ...
 or  (scroll keys)
Scroll through all names in the list from the beginning or end
(A dialpad key) Scroll through only the names that correspond to the three letters on the key
3. When the desired name and number appears . . .
. . . delete the entry by pressing either HOLD.