Specifications

ESP1010
- 26 -
26
INPUT column is a new feature of DirectWIRE 3.0. It's used to route signals
from the card's hardware inputs. With ESP1010, from INPUT 1 to 8 are identical
to the each left and right channels of the analog input signal. And INPUT 9 and
10 are the left and right channels of the digital input.
MME column represents general application's I/O:
Ex.) WinAmp, WaveLab (non ASIO mode), Cakewalk, Audition, Vegas, etc.
WDM column represents Multi-MME application’s I/O:
Ex.) SONAR (WDM/KS mode), PowerDVD, WinDVD, etc.
ASIO column represents ASIO application’s I/O:
Ex.) Cubase, Logic, Reason, Nuendo, SONAR (ASIO mode), Samplitude, etc.
GSIF column represents GSIF applications like GigaStudio.
NOTE: Some applications support multiple driver modes.
3. DirectWIRE Examples
NOTE: Please setting DirectWIRE up first before starting application program.
1) Recording from WinAmp(MME) to WaveLab(MME)
Caution; If you want to record what's played back in Winamp, but don't
want to hear the sound, you should click the OUT button in the MME
section so that it changes to “OUT”
2) Recording from WinAmp(MME) to SONAR(WDM)