Specifications

ESP1010

1. Internal 20ch /36-bit Digtal Mixer(Input 10ch/Output 10ch)

2. Sample rate supports: (22.05,24)*,32,44.1,48,88.2,96kHz : *analog only

3. A/D Converter

1) Signal to Noise Ratio: 107dB (A-weighted) @ fs=48kHz

2) Dynamic Range: 107dB (-60dBFS with A-weighted) @ fs=48kHz

3) S/(N+D)(-1dB): 100dB @ fs=48kHz

4) Interchannel Isolation: -110dB

5) Resolution: 24-Bit

4. D/A Converter

1) Signal to Noise Ratio: 112dB (A-weighted) @ fs=44.1kHz

2) Dynamic Range (S/N): 112dB (60dBFS with A-weighted) @ fs=44.1kHz

3) THD+N: -94dB @ fs=44.1kHz

4) Interchannel Isolation: -100dB

5) Resolution: 24-Bit / 96kHz

5. Digital Input

1) Connector Type: RCA (provided via I/O cable)

2) Format: IEC-60958 Consumer (S/PDIF coaxial)

3) Sampling Rate: 44.1,48,88.2,96kHz

4) Resolution: 24-Bit

6. Digital Output

1) Connector Type: RCA (provided via I/O cable), Optical (on board)

2) Format: IEC-60958 Consumer (S/PDIF coaxial)

3) Sampling Rate: 44.1,48,88.2,96kHz

4) Resolution: 24-Bit

<MIDI>

7. MIDI I/O

1) 2-in, 2-out; 32 MIDI channels in and out

2) Connector Type: MIDI1- Standard MIDI 5-pin DIN (provided via I/O cable)

MIDI2- Standard MIDI 5-pin DIN (provided via Rack)

- 30 -