User`s guide

User’s Guide Special keys
F.6
7. Press NEXT when finished entering the name. You will see the display for entering the number that
goes with the name you entered.
8. Enter the number — including, if necessary, the line access code 9 (or 8 or 71–76). To insert a two-
second pause, press PAUSE.
Note: Use the  scroll key to enter special characters; use the

scroll key to backspace. You also
can use the scroll keys to view the number after it’s saved. To change the number, you must
delete it and then re-enter it as desired.
9. Press STOR to confirm the entry, which the phone will show briefly before returning to the Personal
Dex display.
10. To make another name/number entry, repeat steps 3–9. To finish, press BACK.
Deleting names from your Personal Dex
. . . On an ESI phone with a two-line display
1. While your station is idle (or just after receiving dial tone), repeatedly press ESI-DEX to select the
Personal Dex:
2. Choose the desired name from the Personal Dex, using one of two methods.
Either:
(a.) Scroll — Press the scroll keys (

and

) to look up and down through the Dex until you find
the name (names will appear in the order in which they were stored in the Dex).
. . . Or . . .
(b.) Dial-by-name — Dial up to the first three characters
1
of the name. For example: to bring up
the listing for First International Bank, dial 3 4 7 (because it spells F I R). You’ll begin to see
names that begin with those letters. You can then use the scroll keys (

and

) until you find
the desired name and number.
(Continued)
1
You can also dial just one or two characters, and then press # to enter.