Specifications

PRODIGY 7.1/5.1 LT
- 21 -
21
14. Config
1) Mouse Wheel: Configures the mouse wheel for volume change
adjustment. Default value is ±1.5dB per step. You can configure the
steps to your preference.
Configuration Step 1 Step 2 Step 3 Step 4
Change/Step
±1.5dB ±3.0dB ±6.0dB ±12.0dB
2) Latency: Configures the latency setting for Prodigy 7.1/5.1 LT. Generally,
for multi-track recording we recommend higher latency for stability. For
software synthesizers and mastering software, we recommend lower
latency. The optimal latency setting will depend on your application and
your computer system.
3) Digital Monitor: Digital monitoring from Analog input signal. And you
can send S/PDIF digital signal from analog input.
4) Always On Top: This enables the Prodigy 7.1/5.1 LT panel to be always
displayed on the top.
5) Factory Default: Allows you to revert back to the factory default setting
for all configurations.
6) MME Panel: It shows windows MME sound control panel.
7) Input Gain -3dB: : It lowers -3dB on input gain for reducing clipping
noise on 3. Speaker tab when you use excessive effect on QSound.
8) Use only default device: You can control “Use only default device” on
“Sound and Audio devices properties”
9) Clone 4-way from out1,2: This enables same signal output from output
1,2 to whole channels.
15. File
You can save the panel settings or load it.