Specifications

PRODIGY 7.1/5.1 LT

- 17 -

4) Digital: It shows digital output signal monitor. DMA is for internal data

output and CD is pass thru S/PDIF signal from CD-digital input on CD –

digital in connector.

5) M-Clock: It shows Master Clock of digital output signal frequency.

6) S.R: It shows the sampling rate. When you click “AUTO” then the setting

changes to “LOCK” for fixed sample rate. You can over sample under the

“LOCK” setting. QSound driver (QVE 96-24) supports only 44.1kHz,

48kHz and 96kHz.

2. QSound

You can control QSound® Virtual Engine™ QVE setting on “QSound” tab.

QVE provides a full suite of spatial enhancements for stereo and surround input

formats and output configurations. Applying expansion, virtualization, or

surround synthesis as appropriate, QVE automatically produces the maximum

spatial impact possible from every source/output combination. If you want to

use QSound then you must change audio driver to QVE 96-24.

NOTE: MAS (Master) - This is control for Audio output level.

WAV (Wave) - This is control for Sound frequency. So you can control

PCM digital output

NOTE: CD mode is for only S/PDIF digital input from CD-ROM drive. So please

use DMA mode when you are not using CD-Digital input.