Specifications

PRODIGY 7.1/5.1 LT

- 16 -

The Prodigy 7.1/5.1 LT

panel features pull down menus for configuration.

1. Main

You can control input and output on “MAIN”. It is also the default screen you see

when you first launch the panel. Basic functions of Prodigy 7.1/5.1 LT are

controlled from this screen.

1) Input: You can change the input level on channels 1/2 by clicking and

dragging the fader bar. The number on the bottom shows the relative

amount in dB. Clicking this number enables you to mute the channel.

And you can choose input level MIC or LINE.

2) Output: You can change the output level on all channels by clicking and

dragging the fader bar. The number on the bottom shows the relative

amount in dB. Clicking this number enables you to mute the channel.

And you can choose output monitoring from speaker level to output 1/2

or headphone level to output 7/8(B.S-HP) connector for headphones.

3) WAV·MAS: You can adjust all input / output monitoring levels by clicking

and dragging the fader in the master control panel. Again the number on

the bottom shows you the relative monitoring level in %. Clicking this

number enables you to mute all channels.