User`s guide

AUDIOTRAK Prodigy 7.1 HiFi

Note: MAS (Master) refers to the actual audio output level. WAV (Wave) refers to the actual

playback of (digital PCM) audio data.

4) Digital: It shows digital output signal monitor.

5) M-Clock: Shows the Master Clock of the digital output signal frequency.

6) S.R: Shows the sampling rate. When you click “AUTO” then the setting changes to “LOCK” for

fixed sample rate. The sample rates will be converted during playback when the “LOCK” setting is

active. In QSound mode (QVE 96-24), there is only support for 44.1kHz, 48kHz and 96kHz

2. QSound

You can control QSound® Virtual Engine™ QVE setting on “QSound” tab. QVE provides a full

suite of spatial enhancements for stereo and surround input formats and output configurations.

Applying expansion, virtualization, or surround synthesis as appropriate, QVE automatically

produces the maximum spatial impact possible from every source/output combination. If you want

to use QSound then you must change the audio driver mode to QVE 96-24.

a) QSound Multi Speaker System (QMSS™): It is for multi-channel synthesis from mono and

stereo content* - Outputs: 3, 4 and 5.1-channel speaker systems

QXpander™: It is for mono-to-3D and stereo-to-3D stereo sound stage synthesis and enhancement*

- Outputs: headphones or stereo speakers.

b) QSizzle™, c) QRumble™: It is for Dynamic spectral emphasis. Especially valuable for restoring

compressed audio. (MP3, internet broadcast etc.) - Outputs: all configurations

d) QNormalize: It is for Automatic volume leveling - Outputs: all configurations

* also effective for ambient and music tracks within video games