Specifications

AUDIOTRAK Prodigy 7.1 User’s Guide - 7 -
III. Prodigy 7.1 Driver Software Installation
After completing the installation of hardware for the Prodigy 7.1, you must install the Prodigy
7.1 driver software. The installation steps are slightly different for Windows 98SE, Windows ME,
Windows 2000 and XP. The following installation is based on Windows XP, however the
installation is similar for other operating systems.
NOTE: Before starting the driver software installation, locate your original Windows CD, as you
may need it during installation. If you are installing drivers from the downloaded driver update,
locate your downloaded driver files.
1. Turn on your computer. Windows will automatically detect a new device installation and
the “Found New Hardware Wizard” window will appear.
2. Choose Install from a list or specific location and click Next.
3. Insert the Prodigy 7.1 Installation CD into the CD-ROM drive. Choose Search for the best
driver in these locations. Select Include this location in the search, click the Browse
button, and locate the Prodigy 7.1 driver folder on the Prodigy 7.1 Installation CD.