Specifications

AUDIOTRAK Prodigy 7.1 User’s Guide - 6 -
2. If a faceplate or cover is behind the PCI slot, you can remove it by removing the screw
holding it in place or by prying it off with a screwdriver.
3. Insert the Prodigy 7.1 card into the PCI slot, firmly pushing the card into the slot until it is
seated securely. Replace the screw, and tighten.
4. Attach one end of the two-pin wire to the computer’s CD-ROM drive and connect the other
end to the connector on the Prodigy 7.1 card
5. Close the computer case.