Specifications

AUDIOTRAK Prodigy 7.1 User’s Guide - 37 -
Config - Specifies the number of channels in input/output pair. There are three options: Mono-
to-mono, Mono-to-stereo, and Stereo-to-stereo. Note that if input/output is set to stereo, the
corresponding list of available channels shows stereo pairs instead of single channels.
Note that if you are using VST instrument on the first slot and thus don't need audio input you
can select 'no input' from Input channel list.
Input Channel - The list below shows available input channels or input channel pairs depending
on selected configuration.
Output Channel - The list below shows available output channels or output channel stereo
pairs depending on selected configuration.
Show actual name - If this option is on, the lists of input and output channels show names
returned by ASIO driver. If this option is off the lists show channel numbers instead of actual
names.
4) Application Settings
Here you can select ASIO driver and tune its settings. The page consists of two parts: Driver
selection and loaded driver information.
The driver selection part lets you select ASIO driver from a list of available drivers and set
sampling rate which can be chosen from the list of predefined values or just typed directly.
The sample rate drop down box lists all the sample rates supported by ESI/Audiotrak audio
cards.
IMPORTANT NOTE: Native Sound Processor works only with a set of specific ESI/Audiotrak
audio cards.