Specifications

AUDIOTRAK Prodigy 7.1 User’s Guide - 35 -
[Unload] - Selecting this item will unloads plug in in the current slot.
[Unload all] - Selecting this item will show a message box asking whether you
would like to unload all plug ins.
Plug in slots list - This list represents eight available plug in slots. When plug in is loaded in a
slot, the list item changes from "<Empty>" to the plug in name. Selecting an item in the list will
show a plug in window that corresponds to the selected slot. The icons at the left in the list
represent bypass state. The dot means the bypass if on, and a small loudspeaker means the
bypass is off. To switch between these two states just click on the icon.
If you right-click on the Slots List a pop-up menu will be displayed with the following items:
[Move Up], [Move Down] - Moves the currently selected plug in up/down in the list.
[Unload] - Unloads the currently selected plug in in the list.
[Unload All] - Unloads all the plug ins in the list.
Note: If you would like to see the full name of the loaded plug in, just move the mouse over
the slot and wait for a second. The full name will be displayed as a tip.
Presets > - Pressing this button shows a pop-up menu with the following items:
[All presets >] - Selecting this item will open a submenu that lists all
available internal VST presets of a plug in loaded into currently selected
slot. To load an internal VST preset just selects it from the list. The
current VST preset is marked with a check in the menu.
[Rename preset] - Selecting this item will show a small dialog where you
can set a new name for the current preset.
[Load preset], [Save preset], [Load bank], [Save bank] - These four items
allow to import and export preset/bank files in "fxp" and "fxb" formats
which are standard files for transferring presets between VST hosts.
Note that presets button is enabled only when a VST plug in is loaded.
Bypass All - Bypass buttons. Note the difference between start/stop and bypass: Bypass simply
bypasses the plug in processing, but the audio is streamed from input to output which is not
happening when streaming is not started.
Setup... This buttons shows a pop-up menu with setup options:
[Routing] - Shows audio routing dialog. See [3.2. Audio Routing] for details.
[Save as default] - Saves the current setup to a special file that can be set to be automatically
loaded on start-up (See 3.3.3 for details)
[Load default] - Loads the saved default setup.