Specifications

AUDIOTRAK Prodigy 7.1 User’s Guide - 32 -
After plug ins are loaded you can now start the streaming and processing (you can load them
when streaming is on too, it's not recommended though). Just press 'Start' button. Now the CPU
meter should start showing actual CPU loading and you should hear the sound processed by the
plug in from your audio card output. If you don't, then it might be that you haven't selected the
inputs/outputs properly. Just go to Audio I/O routing settings and try to select other settings.
You can do that while streaming is active.
When you've played with the streaming and processing let's save the current application
setup so that next time you don't have to start from scratch. Press 'Setup' button and select
'Save As' item. A save file dialog asking for a file name will appear. Type a name and press
save. The setup will be saved.
Load on start-up - There are three options: Nothing, Autosave, Default:
Nothing - Loads nothing
Auto save - Loads a setup file automatically saved on the application exit. (See the option
below)
Default - Loads default setup file. Select this option if you would like the application to be
started every time with a specific settings saved as a default setup through 'Setup\Save as
default'.
Save setup on exit - If this option is on, the application automatically saves the current setup
to a file that can be loaded back on start-up. The auto-save file name is autosave.aps and it's
resided in the product installation folder.
It's enough for the quick start so let's close the application just be pressing 'Exit' button. Next
time you run the application you can load the saved setup by pressing 'Setup' button and
selecting 'Load As' item.