User`s guide

Special keys User’s Guide
F.2
Esi-Dex
(Not available on ESI Cordless Handsets or 12-Key Feature Phone.)
Esi-Dex (“easy Dex”) is a powerful feature that lets you access and auto-dial stored names and numbers.
You may access names and numbers from as many as four different Dexes (i.e., indexes):
Dex Source
Personal Dex Names you’ve stored for your use (see “Adding names to your Personal Dex,” below)
Station Dex All station, department, and guest mailbox names programmed by the Installer
System Dex
1
All system speed-dial names set up by the System Administrator
Esi-Dex prompts displayed on a 48-Key Feature Phone
Prompt What it means
[Arrows] Move in the direction of the arrow as desired
BACK
Moves backward to previous screen/record
DEL
Deletes a specific name and/or number shown on the display
DIAL
Dials the phone number
EDIT
Edits information shown on the display
NEW
Creates a new record in Esi-Dex
NEXT
Moves to next record or programming prompt
PAUSE
Inserts a three-second pause in a phone number (if required for proper dialing)
PER
Selects Personal Dex
STA
Selects Station Dex
STOR
Stores a name and phone number
SYS
Selects System Dex
Auto-dialing using Esi-Dex
. . . On the 24-Key Feature Phone
1. While your station is idle (or just after receiving dial tone), repeatedly press ESI-DEX to select the
desired Dex:
2. Choose the desired name from the selected Dex, using one of the two following methods:
Press repeatedly . . . To . . .

or

(scroll keys)
Scroll through all names in the list from the beginning or end
(A dialpad key) Scroll through only the names that correspond to the three letters on the key
3. When the desired name and number appears . . .
. . . press ESI-DEX again to dial the number.
1
The System Dex is available only if the System Administrator has programmed system-wide speed-dial numbers.