Installation manual

IVX C-Class Installation Manual Function 6: Recording
H.1
Function 6: Recording
Function 63: Message-on-hold (MOH) programming
MOH can be:
• A live feed from an external music source connected to the MOH connector located on the side of
the cabinet.
• One of three default, generic MOHs pre-recorded by the factory.
Function 631: MOH source
This selects the source that will be played to callers on hold.
Code Source
590
Live external source*
591
Pre-recorded music
592
Pre-recorded with “please continue to hold”
593
Pre-recorded with “dial 0 or extension from hold”
* Dialing off-hold doesn’t work.
Default: 592 (generic message-on-hold).
Notes: If an external audio source such as a radio is used for MOH, adjust the volume at
the source.
To turn live MOH volume completely off, turn off volume at the source.