Installation manual

ESI-50L Programming Manual IP programming
L.2
Function 824: Network Services Processor (NSP)
The built-in NSP provides an IP network connection for maintenance and other features, such as VI P unified
messaging. You enter each of the following parameters in one operation.
• NSP private IP address — View or enter the IP address for the NSP.
Range: 1.0.0.1 through 254.254.254.254.
• NSP subnet mask — Enter the IP subnet mask of the network to which the NSP is connected.
Range: 0.0.0.0 through 255.255.255.252.
• NSP gateway — Enter the default gateway IP address of the NSP.
Range: 1.0.0.1 through 254.254.254.254.
• NSP public address — Enter the public WAN address that routes to the NSP if it differs from that for the PBX.
Range: 1.0.0.1 through 254.254.254.254.
The following parameters will appear only if VIP unified messaging has been installed on the system:
• Unified messaging e-mail server — Enter the IP address of the customer’s e-mail server.
Range: 1.0.0.1 through 254.254.254.254.
• Unified messaging e-mail address — Enter the e-mail address assigned by the e-mail System
Administrator. To enter a period (“dot”), press 1. To enter the @ symbol, press # #.