Installation manual

ESI Communications Servers Programming Manual Function 7: Reports
J.2
Function 72: ESI Presence Management access door report
The ESI Presence Management access door report is available to the Installer and System Administrator, and is
based on historical data for the desired access door RFID Reader.
1
The report contains records of extensions/mailboxes, names, RFID tag numbers, and the date and time from the
10,000 most recent records for access-only door (not entrance/exit) RFID Readers in the system. Once the limit
of 10,000 is reached, older records are discarded as newer records are stored. Initializing the system deletes all
stored records.
1. Enter the extension number of the desired access door RFID Reader, and press #.
EPM READER
EXT: 123
2. Enter the start time in 12-hour, HHMM format, and press #.
ENTER START TIME
3. Use the scroll keys to select AM or PM for the start time, and press #.
ENTER AM OR PM
4. The eight-digit start date for this report is composed of two digits for the month, two digits for the day, and
four digits for the year. The start date should be today’s date or earlier. Enter the start date in MMDDYYYY
format, and press #.
ENTER START DATE
5. Enter the end time in 12-hour, HHMM format, and press #.
ENTER END TIME
6. Use the scroll keys to select AM or PM for the end time, and press #.
ENTER AM OR PM
(Continued)
1
For reference, if necessary, consult the ESI Presence Management Installation Manual (ESI #0450-0792).