Installation manual

ESI-50L Programming Manual Function 5: Voice mail programming
H.5
Function 552: Delivery/paging parameters
The sequence of programming is as follows:
1. CO line access — Enter the CO line group (9, 8, or 71–76) that is to be accessed for delivery.
Default: 9.
2. Pager dialing pause — When paging, the system will send the mailbox number to be shown in the
pager’s display. To allow time for the paging service to answer, enter the pause, in seconds, to occur
between when the system dials the pager number and when it then dials the mailbox number.
Range: 0–20. Default: 6.
Note: The message notification and delivery process uses one CO line at a time. As a result, if a system has
multiple users who have programmed delivery options, there may be a delay in notification.