User`s guide

User’s Guide Analog stations
G.5
Analog station programming
After logging into the mailbox (pressing  followed by the mailbox number), dial 5 to program.
Select greeting
Select the desired greeting number: 1, 2 or 3. The system will prompts to re-record, delete, hear, or
select as the current greeting by pressing #.
1 Record greeting
Begin recording at the tone; press 1 to stop. The new greeting automatically replaces the
previous greeting.
Note: The mailbox will be disabled if no greeting exists.
2 Delete greeting
When prompted, press 2 again to confirm deletion.
Warning: Don't delete all of your greetings. If you do, the system will turn off the mailbox until at
least there is once again at least one greeting.
3 Hear current greeting
Password
The password will apply to station programming, message retrieval and certain other features
(when activated).
1 Enter new password
Your password may consist of 2–8 digits followed by # (0 cannot be the first digit). Entering 0
(zero) as the sole password will turn off the password requirement.
2 Delete current password
3 Hear current password
4 Password security level
Select one of the following password levels.
Selection Result
0
No password required for access from any phone
1 Password required only for remote access, either off-premises or from other
stations within the system
2
Password always required