User`s guide

Special keys User’s Guide
F.6
Line keys
If some of your programmable feature keys have been programmed as line keys (or you can program
line keys using PROG/HELP 2), press an unlit key to access the line. An outside call transferred to your
station can be answered by simply lifting the handset or pressing SPEAKER. You do not have to press
the line key. The LED indications for the line keys are:
LED Line status
Solid red
In use
Solid green
Connected to your station
Blinking red
Ringing at another station
Blinking green
Ringing at your station
Slowly blinking red
On hold by another station
Slowly blinking green
Held by you
Note: Dialing 9 (or 8 or 7) to be assigned a line automatically is always available.
Optional features
The following optional features may be accessible from your station. See the Administrator for details.
In many of the cases you can dial the appropriate feature code (one that starts with 5) to activate or use
the feature. In some instances, you must use a programmable feature key to serve as an on/off key for
the feature (see “Programmable feature keys,” page C.2).
• Other feature keys — If you enter one of the following feature codes, the programmable feature key
will serve as an enable/disable key for that feature. The Installer may have programmed certain
stations for accessing additional features; consult your System Administrator for your access.
Code(s) Key usage
199
Overhead page
560
Day/night mode
564
Headset
565
Call forward
565YYY
Call forward to an extension
568
Message monitor
569
Background announce
570
Conference
571
Personal Greeting 1
572
Personal Greeting 2
573
Personal Greeting 3
575 and 576
Virtual Answer
578
Mute/DND
579
Voice Mail
580
Override ring
Note: Gray-shaded items are the only key codes available for the 12-Key Digital Feature Phone.