User's Manual

Remote controller assembly
Remote controller includes front-board、PCBA、backboard (with clip) and holder-board.
Connecting the backboard to PCBA board according to sharp, then cover the front-board
after fastening them together with screw. Holder-board is designed in order t to user hold
controller more convenience. It will connect together so long as you clamp holder-board
with the clip of backboard.
Host assembly
The host consists of front-board、PCBA and backboard.
There’re three I/O port on PCBA board: earphone port、charge port and data linker port.
Assembling them together according to port type of PCBA、 notching conditions of
front-board and backboard, then fastening them with gluewater.