Installation guide

NOD32 Installation Guide
40
On-demand scanning
So, you’ve setup the scanning proles to your liking, or maybe you’ve
chosen to stick with the default settings, and run a scan of your PC. Now
you can instigate a scan of a specic drive on your computer, or specic
les, or a Floppy disk or CD, etc. using your pre-dened setups saved
under the Proles tab. This is
called an On-demand scan.
In the Control Centre, under
‘Threat Protection Modules’,
click ‘NOD32’ and in the right
hand window click one of
the 4 buttons that suits your
requirements:
‘Local’ to instantly start a scan
of all local drives
‘Run NOD32’ to open the setup
tabs as previously mentioned
in Proles on page 32
‘Diskettes’ to instantly start a
scan of any oppy diskettes
‘In-depth analysis’ to instantly scan everything on your machine with
more depth than a standard scan. This scan has it‘s own prESET, in-
depth parameters, with everything set to maximum, so is not governed
by the Prole(s) you have previously setup. This scan could therefore
take much longer than a normal scan.
•
•
•
•