Installation manual

42
3.3.2.1.4.1 Allowed senders
Whitelisted senders and domains can contain an email address or a domain. Addresses are entered in the format
"mailbox@domain" and domains simply in the format "domain".
NOTE: Leading and trailing white space is ignored, regular expressions are not supported and asterisk "*" is ignored
as well.
3.3.2.1.4.2 Blocked senders
Blacklisted senders and domains can contain an email address or a domain. Addresses are entered in the format
"mailbox@domain" and domains simply in the format "domain".
NOTE: Leading and trailing white space is ignored, regular expressions are not supported and asterisk "*" is ignored
as well.
3.3.2.1.4.3 Allowed IP addresses
This option allows you to specify IP's which should be approved. Ranges can be specified in three ways:
a) starting IP - ending IP
b) IP address and network mask
c) IP address
If the first non-ignored IP in Received: headers match any in this list then message is scored a 0 and no other checks
are made.
3.3.2.1.4.4 Ignored IP addresses
This option allows you to specify IP's which should be ignored when doing RBL checks. The following are always
implicitly ignored:
10.0.0.0/8, 127.0.0.0/8, 192.168.0.0/16, 172.16.0.0
Ranges can be specified in three ways:
a) starting IP - ending IP
b) IP address and network mask
c) IP address
3.3.2.1.4.5 Blocked IP addresses
This option allows you to specify IP's which should be blocked. Ranges can be specified in three ways:
a) starting IP - ending IP
b) IP address and network mask
c) IP address
If any IP addresses in Received: headers match any in this list then message is scored a 100 and no other checks are
made.
3.3.2.1.4.6 Allowed domains
This option allows you to specify body domains and IP's which should should always be approved.