Installation manual

Enter your Username and Password information into the global section of the ESET configuration file using a text editor:

vi @ETCDIR@/esets.cfg

Edit the ESETS Update options section of the ESETS configuration file.

av_update_username = "EAV-12345678"

av_update_password = "yourpassword"

Start main daemon service:

Linux OS:

/etc/init.d/esets start

BSD OS:

/usr/local/etc/rc.d/esets.sh start

Once the package is installed, you can verify that the main ESETS service is running by using the following command:

Linux OS:

ps -C esets_daemon

BSD OS:

ps -ax | grep esets_daemon

Solaris:

ps -A | grep esets_daemon

After pressing ENTER, you should see the following (or similar) message:

PID TTY TIME CMD

2226 ? 00:00:00 esets_daemon

2229 ? 00:00:00 esets_daemon

At least two ESETS daemon processes are running in the background. The first PID represents the process and threads manager of

the system. The other represents the ESETS scanning process.

To help you easily integrate ESET Security with your system, you can also use the ESET Security interactive automated install

script. Note that automated installation is not available for File Servers. For more information, see the guide in /opt/eset/esets/

share/doc for general instructions. You can undo all changes later. A list of available ESETS installations/uninstallations

according to imported licenses will be displayed.

@SBINDIR@/esets_setup