Instructions / Assembly

ManualsBrandseSenLite ManualsCeiling Lights360 Degree Pure White LED Built-In Doppler Motion Sensing Technology Light with Energy Savings and Multi-Smart Features

1 - LED Sensing Light Unit 4 – Hardware Package with Screws and Anchors to mount the light body 1 -

Thank you for choosing the EE118WMC LED SMART Light. With its effortless setup and lightweight design, the EE118WMC

LED Smart Light conforms to all your lighting needs. It was designed and made to provide many years of trouble free service

using environmentally friendly LED-Doppler Sensing technology. Covered under multiple US, European, China and other

EE118WMC User Manual

Applications

Introduction and Intellectual property Rights Statement

The Package

● What’s Inside the Package ● Installation ● Functions ● User Tips

● Specifications ● Optional Accessories ● Important Safety Information ● Limited Warranty Information

Rev. EE118WMC 02082016 Page 1

AC powered LED Sensing Light, with “All in One” Operating Capability:

Standard - Can be used for new AC lighting installations or to replace existing out-dated light fixtures or lamps as a standard

ON-OFF switch controlled light and also for AC power applications that provide continuous illumination.

*Doppler Sensing – Provides outstanding motion sensing performance and unlike standard PIR motion detection it is

effective in sensing changes in ambient temperature and it is not blocked by obstacles (wall, glass e.g.)

Smart Sensing Profiles – Can be set for either of two pre-selectable dual SMART Energy Saving Modes. If the sensor

does not detect any motion in the covered area after the pre-set delay timing window then it can be auto-set to either

“

Dusk to Dawn – When install it with AC power ON (without switch manually control) that it can provide all night Safety/

Security lighting; it has a built-in adjustable ambient light photo sensor that automatically turns the light on to a pre-set

lighting level when it senses a change in ambient lighting level of environmental, and the motion sensor/switcher & timer will

activate it to full brightness if motion is sensed.

Standard AC Lighting for Residential: (Fig. 1)

Standard AC Lighting for Commercial, Industrial or Public Facilities: (Fig. 2)

Please Read Carefully Before Installing the Unit!

Turning to Open the cover

Installation

Mount & Setup (Turn power OFF before installing)

Screw the light fixture base onto the pre-installed/existing electric

standard J-Box and connect power wires (N & L /H), refer: Fig. 1,

1A & 4. For concrete/brick/stucco surface without the J-Box: It is

best to drill clearance holes using a 3/16" masonry bit then insert

plastic anchors and screw the base into position. Make sure

mounting is secured and safe by your local electric code. Then

power ON as general lighting control for normal lighting function.

Apply as Standard Light:

Just connect with AC power source (120V AC) as any standard

lighting system. The light can be manually turned and via a

standard wall mounted switch as general lighting (all set with max)

or with motion activated or dimming function (refer: ).

Mount the base with standard J-Box

or other drill holes mount option

Wall Switch

White

Black/Red

120VAC

L/H

Individual New or Replacement Application

Connect two power wires

Turning to close the cover

Multiple New or Replacement Application

120VAC

Black/Red

White

L/H

N H

6-½”

Summary of content (2 pages)

PAGE 1
® 6-½” EE118WMC User Manual Please Read Carefully Before Installing the Unit! Introduction and Intellectual property Rights Statement Thank you for choosing the EE118WMC LED SMART Light. With its effortless setup and lightweight design, the EE118WMC LED Smart Light conforms to all your lighting needs. It was designed and made to provide many years of trouble free service using environmentally friendly LED-Doppler Sensing technology.
PAGE 2
Apply as Dusk to Dawn Automatic SMART Activity Lights: For hallway/corridor, stairway, public restroom, elevator lobby and any secured common area. The unit(s) is just as easy to connect with AC power (120V AC) as any standard new or replacement lights. When the power is all the time, this light will automatically convert to its light sensing function, and it will only illuminate to the pre-set ambient light level and detect any movement within the delay period time.